SHELL MOLD CASTINGS EXPERT(0.5KG TO 100KG)
AISI GR.E steel castings and Ductile Iron casting 100-70-03/120-90-02
CAPACITY AND MATERIAL
• Low temperature steel: The mechanical properties are as follows: -46 ℃ low temperature impact energy ≥ 18J, tensile strength ≥ 620MPa, yield strength ≥ 450 MPa, elongation ≥ 24%, and reduction of area ≥ 43%. The main products include standard container corners, special container corners, and liquid nitrogen valve bodies;
• Carbon steel alloy, for railcar and freight car products,according ASTM GR.A,B,C,D,E
• Wear resistant steel: Different from current high manganese steel and high chromium cast iron, independently developed steel has the following mechanical properties: tensile strength ≥ 1300MPa, yield strength ≥ 1000 MPa, elongation ≥ 5%, and hardness HRC ≥ 55. The main products are rotating hubs for steel rolling equipment, plate hammers for mining equipment, and various types of lining plates;
• Various grades of plain carbon steel: mechanical structural components used in various industries. Products such as door hinges for electric control cabinets and mechanical structural components for forklifts;
• Austenitic stainless steel (316L --00Cr18Ni9Ti): impeller for food machinery;
• The wear-resistant and heat-resistant steel developed is in a leading position in China for use in rolling mill hubs.
•Precision ductile iron castings,Ductile iron grades: 65-45-12, 70-50-05, 100-70-03, 120-90-02, that is, the tensile strength of cast ductile iron can reach from 450 to 1050 MPa, and the elongation rate can reach 12% to 2%; Widely used in mechanical structural components, such as military brackets, truck transmission links, etc
Weights ranging of single casting from 0.5kg to 100 kg.
WHO WE SERVICE FOR
FREIGHT CAR AND RAILCAR COMPONENTS
Coupler Operating parts: Locks,lock lifters and knuckle throwers
Knuckles: E ,F and H Knuckles
Wear Prevention: Manganese Coupler carrier wear plate
Truck systmes: Center plate
End of car systems: Draft lug and Draft Gear accessories
OUR CAPACITY SHOW,COPYRIGHT BELONG TO OUR CUSTOMERS
|
|
|
|
|
Rear draft lug,GR.B+ steel, shell mold castings or Forgings |
Draft lug,GR.B+ steel,shell mold castings |
Lever Bracket,Ductile Iron,shell mold castings |
E30AB thrower,GR. B steel castings,shell mold |
F31AB thrower,GR. B steel castings,shell mold |
|
|
|
|
|
Hook for Canada freight car,GR. E castings,shell mold |
Casting Center plate,GR.B castings or forgings |
Y46AE Follower block,castings or forgings |
E24B Lock lift |
Casting bracket,GR.B,shell mold castings |
|
|
|
|
|
Truck lever,7X14,5X10 ,C-1045 forgings with heat treatment
|
Manganese coupler Carrier Wear Plate,shell mold castings
|
draft key and washer
|
Push Rod
|
Yoke, GR.E,shell mold casting steel
|
|
|
|
|
|
pivot,shell mold castings with machined , for France |
Yoke,GR. E castings |
Knuckle,GR.E,shell mold casting |
Brakeshoe holder |
Coussinet,Ductile Iron castings 100-70-03 |
|
|
|
|
|
Knuckle,shell mold castings GR.E
|
Yoke,GR. E castings,Shell mold casing |
Center plate castings with machined and heat treatment |
Shell mold castigs ,knuckle,GR.E steel casting |
Shell mold castings,GR. E steel. Yoke |
|